Ice Maker Repair in Great Falls, VA
No ice, slow production, or leaks in built-in units. Our specialist technicians serve Great Falls, VA with same-day appointments, upfront pricing, and a 90-day warranty on every repair.

Your Local Ice Maker Repair Team in Great Falls
Great Falls' large properties near the Potomac often run premium built-in refrigeration and wine storage that demands a specialist, not a generalist.
We proudly serve Great Falls neighborhoods including Great Falls Village, Seneca, Riverbend, Forestville — usually with same-day availability.
Why an Ice Maker Stops Making Ice
Most ice maker faults trace to water supply or the ice-making module, not the whole appliance. Here is how we sort them out in Great Falls.
- No ice at all
- The water inlet valve, a frozen fill tube, or a failed ice maker module. We test the valve and the module's heater and motor separately so only the failed part is replaced.
- Small, hollow, or cloudy cubes
- Low water pressure or a clogged filter or valve screen. Often a quick fix once the flow is measured.
- Water leaking near the ice maker
- A cracked fill tube, loose line fitting, or a drain problem on an undercounter unit.
- Ice tastes or smells off
- A saturated water filter or stale ice sitting in the bin. Cleaning the bin and replacing the filter resolves most cases.
- Unit freezing up into a solid block
- A stuck water valve or a faulty temperature sensor lets water keep flowing after the cycle should stop.
- Ice maker runs but the bin stays empty
- Usually a jammed ejector arm or a bail-arm switch that is not registering.
We schedule ice maker visits across Great Falls Village, Seneca, Riverbend and the rest of Great Falls.
Common Ice Maker Problems We Fix in Great Falls
Something else? We fix it all in Great Falls. Call (571) 571-1664
Why Great Falls Homeowners Choose Commonwealth
Same-Day Service
Fast appointments across Great Falls, 7 days a week.
A Local Team That Answers
Real local specialists you can reach — not a call center.
90-Day Warranty
Parts and labor on every repair are covered for 90 days from the service date, in writing on your invoice.
Upfront Pricing
You approve the price before any work begins.
Ice Maker Repair in Great Falls — FAQ
Do you offer same-day ice maker repair in Great Falls?+
Yes. We offer same-day and next-day ice maker repair throughout Great Falls, VA whenever our schedule allows. Call early in the day for the best chance of a same-day visit.
How much does ice maker repair cost in Great Falls?+
We diagnose the problem and give you a firm, upfront price before any work begins — no surprises. Every repair in Great Falls is backed by our 90-day parts and labor warranty.
Do you repair luxury ice maker brands in Great Falls?+
Absolutely. High-end appliances are our specialty in Great Falls — we service Sub-Zero, Wolf, Viking, Thermador, Miele, Bosch, and every other major brand.
Do you install new ice makers in Great Falls?+
No. We repair existing appliances only — we don't sell or install new units. If a repair doesn't make financial sense, we'll tell you so honestly.
Can you service appliances in Great Falls gated communities and larger estates?+
Yes. We regularly work in Great Falls estates and gated communities along the Potomac River corridor. Our technicians coordinate with household staff and property managers when needed, and bring a full parts inventory on the first visit to keep the service efficient and unobtrusive.
How to Diagnose an Ice Maker Problem Before Calling
Run through these checks in Great Falls before calling — you may save a service visit.
- 1
Check that the ice maker arm or switch is set to ON
Many ice makers have a wire arm or a wall switch that pauses production when ice is full — or gets accidentally bumped. Confirm it's in the down (ON) position.
- 2
Verify the water supply line is open and pressurized
The supply shutoff valve (usually behind the refrigerator or under the sink) must be fully open. Low pressure — below 20 PSI — causes the ice maker to produce hollow or crescent-shaped cubes, or none at all.
- 3
Inspect the inlet valve screen for mineral buildup
Hard water deposits clog the small screen on the water inlet valve. Turn off the supply, remove the valve line, and rinse the screen under running water.
- 4
Check for ice jams in the bin or auger
A cluster of fused cubes can jam the ejector arm or auger motor. Empty the bin, clear any clumps, and run a harvest cycle (usually a test button on the ice maker module).
- 5
Call a technician if the ice maker leaks or the module is unresponsive
Water pooling under or inside the refrigerator, or an ice maker that ignores the test button, indicates a failed module, inlet valve, or ice mold heater — all require professional service.
Still having trouble? Call (571) 571-1664 for same-day ice maker repair in Great Falls.
Want to diagnose it first? See our common-symptom troubleshooting guide →
Need ice maker repair in Great Falls today?
Same-day appointments across Great Falls, VA. Call for the fastest response, or fill out the form and we'll call you right back.
Call (571) 571-1664
