Thermador Appliance Repair Cost: What to Expect in 2026
Quick answer
Thermador appliance repairs typically run $250–$700 for common issues like Star Burner igniters, induction error codes, or dishwasher pumps, while control boards and sealed refrigerator systems can reach $600–$1,200. A diagnostic is usually $90–$150, often applied to the repair. Costs vary by appliance type and model, and you get an exact upfront quote first.
Thermador appliances — Star Burner ranges, Freedom induction cooktops, Sapphire dishwashers, and column refrigerators — are engineering-forward, which means repairs require a technician who knows their proprietary systems. Parts are specialized, and costs run higher than mass-market brands. This guide gives you realistic Thermador repair ranges for Northern Virginia and DC so you can plan with confidence before you call.
Why Thermador repairs cost more than average
Thermador is part of the BSH (Bosch-Siemens) family but uses Thermador-specific boards, induction modules, and Star Burner hardware that differ from Bosch parts. The ExtraLow simmer system, Sapphire dishwasher pump, and Freedom induction power inverter are precision components that cost more to source and take longer to diagnose correctly. A Thermador range runs $4,000–$10,000 new, and built-in refrigerators and dishwashers add cabinetry integration, both of which push repair well past the break-even point of a typical bill.
Ranges, cooktops, and ovens: common repairs and ranges
As ballparks: a Star Burner igniter or spark module often runs $200–$450; an ExtraLow simmer valve or burner cap $200–$400; a temperature sensor or oven element $200–$500. A control board or touch interface on a wall oven typically runs $400–$900 because Thermador control boards are proprietary and source pricier than generics. Induction cooktop module failures — where a zone stops responding or throws an error — can run $350–$800 depending on which power board or IGBT section failed. Every number depends on the exact model and part, so we confirm it upfront.
Dishwasher and refrigerator repairs
Thermador's Sapphire dishwashers share BSH platform parts but with Thermador-specific control modules. A drain pump or circulation pump repair typically runs $250–$500; a door latch, dispenser, or control board $300–$650. For Thermador column refrigerators, fan motor or control board repairs generally run $350–$700, while sealed-system and compressor work can reach $700–$1,400 — similar territory to other high-end column refrigerators because the refrigerant work is specialized and EPA-regulated regardless of brand.
Repair or replace your Thermador?
With Thermador ranges priced at $4,000–$10,000, dishwashers $1,500–$3,000, and column refrigerators $4,000–$8,000 new, repairs typically make strong financial sense unless multiple major components fail at once on a very aged unit. These appliances are built to be serviced — proprietary parts are available through BSH channels. Our specialist technicians will give you a straight, honest repair-versus-replace assessment. If a repair isn't worth it on your specific unit, we'll tell you plainly.
When to Call a Specialist
Thermador's Star Burner system, induction power modules, and Sapphire pump assemblies need a technician who diagnoses them regularly, not one guessing through generic procedures. Our specialist technicians identify the exact failed part, then give you a clear upfront quote before any work begins — no surprises. Same-day service across McLean, Vienna, Tysons, Fairfax, and DC, backed by our 90-day workmanship warranty. Call (571) 571-1664 for your Thermador today.
Frequently Asked Questions
Why is my Thermador induction cooktop showing an error code?
An induction error usually points to a pan-detection fault, an overheated power module, or a failing IGBT inverter board. Repairs typically run $350–$800 depending on which board or zone failed. Our technician diagnoses the exact cause on-site and provides an upfront quote before any work begins.
Is it worth repairing a Thermador range or wall oven?
Usually yes. Thermador ranges cost $4,000–$10,000 new, so most repairs — including control board replacements in the $400–$900 range — are the smarter financial call. We'll give you an honest repair-versus-replace recommendation with real numbers before any work starts.
Does the diagnostic fee apply to the repair?
In most cases, yes. The diagnostic fee — typically $90–$150 — covers on-site troubleshooting and is usually credited toward the repair if you proceed. We confirm exactly how it applies and provide an exact upfront quote before starting any work.
Rather have us handle it?
Same-day oven & range repairacross Northern Virginia & DC. Upfront pricing, 90-day warranty, specialist technicians.
Call (571) 571-1664Related