Ice Maker Repair Cost: What to Expect
Quick answer
Most ice maker repairs run roughly $150–$400, including a diagnostic of about $90–$150 that's often applied to the repair. Common fixes — water inlet valves, fill tubes, and the ice maker module itself — sit in that range, while built-in units with tighter access cost more. Costs vary by part and brand, and you get an exact upfront quote first.
When your ice maker stops producing, slows to a trickle, or a built-in unit in a Sub-Zero or Viking refrigerator goes quiet, you want a straight answer on cost before scheduling a visit. Most ice maker repairs are affordable, with a few common parts accounting for the vast majority of service calls. This guide breaks down realistic ice maker repair costs for Northern Virginia and DC homeowners so you know what to expect before you call.
What drives ice maker repair cost
Your total comes down to the diagnostic fee, the part, and the labor. Diagnostics typically run $90–$150 and are often credited toward the repair if you proceed. Standalone ice maker modules in mainstream refrigerators are moderately priced, while built-in units from Sub-Zero, Viking, or Thermador use proprietary assemblies that cost more and take longer to access behind cabinetry. We diagnose the exact cause first, then quote an exact price before any work begins.
Common repairs and ranges
As ballparks: a water inlet valve or blocked fill tube often runs $100–$250; a thermostat or temperature sensor $150–$300; the ice maker motor or module itself $225–$450; a shut-off arm or sensor $100–$225. Slow production, small or hollow cubes, and a unit that's stopped entirely usually trace to one of these. A full assembly replacement on a built-in unit sits at the higher end. The exact cost depends on the brand and part, so we confirm it upfront.
Built-in units cost more to access
An ice maker built into a Sub-Zero, Viking, or Thermador column refrigerator is integrated behind cabinetry and shares plumbing with the rest of the sealed system, so diagnosis and part access take longer than on a bolt-on standalone unit. That added labor is why built-in ice maker repairs often land at the higher end of the range. Even so, these are precision components designed to be serviced, and a targeted repair is almost always the smarter cost than replacing the whole refrigerator.
Repair or replace your ice maker?
A standalone ice maker module typically costs $250–$600 to replace outright, so if a repair approaches that on an aging mainstream unit, swapping just the module can make sense. On a built-in refrigerator, the ice maker is one component of a much larger appliance, so replacing the whole unit rarely makes financial sense over a targeted repair. Our specialist technicians will give you an honest recommendation based on what's actually failing.
When to Call a Specialist
No ice, slow production, or a jammed ice maker shouldn't mean guessing at the cost. Our specialist technicians diagnose the exact issue, then give you a clear, upfront quote before any work begins — no surprises on the invoice. With same-day service across Northern Virginia and DC and a 90-day workmanship warranty, you can decide with full information. Call (571) 571-1664 to get your ice maker fixed today.
Frequently Asked Questions
Why did my ice maker suddenly stop making ice?
A stalled ice maker usually traces to a shut-off arm stuck up, a low or frozen water supply line, a clogged filter, or a failed fill valve. Repairs commonly run $100–$300 depending on the part and brand. We diagnose the exact cause on-site and provide an upfront quote before any work begins.
How much does it cost to fix a built-in ice maker?
Built-in ice makers in Sub-Zero, Viking, or Thermador refrigerators typically run $200–$450 to repair because the assembly is integrated behind cabinetry and shares plumbing with the sealed system, which adds labor. The exact figure depends on the failed part, which is why we diagnose first and quote precisely.
Is it cheaper to replace the ice maker module than repair it?
A standalone module replacement runs roughly $250–$600, so on an aging mainstream unit a full module swap can be the better value. On a built-in refrigerator, replacing just the failed part is almost always cheaper than replacing the whole ice maker assembly. We'll give you an honest recommendation once we've diagnosed the actual fault.
Rather have us handle it?
Same-day ice maker repairacross Northern Virginia & DC. Upfront pricing, 90-day warranty, specialist technicians.
Call (571) 571-1664Related

